Ade Advanced Optics D1 Red Dot Mounting Plate for Glock with Aircraft Grade Aluminum Body (Black)
Ade Advanced Optics D1 Red Dot Mounting Plate for Glock with Aircraft Grade Aluminum Body (Black)
The Ade Advanced Optics D1 Red Dot Mounting Plate in Black is an optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to Glock ‘100’. Does not fit Glock with aftermarket slide with optic cut. This Glock plate fits Taurus TX22 Gen2 (not compatible with old TX22), GX4, G3C, and G3 with factory steel sights (does not fit any other Taurus models such as G2, G2C, and G3 without factory steel sight Tx22 or PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. This Glock plate also fits Canik non-optics ready pistols such as TP9 V2, TP9 SA, TP9 DA, TP9 SA MOD 2, TP9 SF, TP9 SFT, TP9 SFL. The rear sight dovetail dimension between those Canik pistol dovetails and Glock rear sight dovetails are the same. It does not fit optic ready Caniks, such as TP9 Elite Combat, TP9 SFx, TP9 Executive, METE or Rival models. It fits Ade RD3-006A (Huracan), RD3-006B (Python), RD3-009 (Crusader), RD3-012 (Delta), RD3-013 (Bertrillium), RD3-015 (Zantitium), Vortex Venom and Viper, Burris Fastfire, Meopta, Shield, Docter, and Insight red dots. Does Not fit trijicon rmr, holosun, or shield footprint red dots.
Construction
Machined from aircraft-grade aluminum with hard anodizing finish. It comes with screws and hardware for installation. Ade Advanced Optics highly recommend DIY only if user has gunsmith experience, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm or optic and personal injury. This plate does not fit Glock with an aftermarket slide. Attaches firmly to your firearm for sure performance in tactical situations. It replaces the Picatinny mount packaged with the red dot sight.
More Images
Ade Advanced Optics D1 Red Dot Mounting Plate for Glock with Aircraft Grade Aluminum Body (Black)
The Ade Advanced Optics D1 Red Dot Mounting Plate in Black is an optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to Glock ‘100’. Does not fit Glock with aftermarket slide with optic cut. This Glock plate fits Taurus TX22 Gen2 (not compatible with old TX22), GX4, G3C, and G3 with factory steel sights (does not fit any other Taurus models such as G2, G2C, and G3 without factory steel sight Tx22 or PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. This Glock plate also fits Canik non-optics ready pistols such as TP9 V2, TP9 SA, TP9 DA, TP9 SA MOD 2, TP9 SF, TP9 SFT, TP9 SFL. The rear sight dovetail dimension between those Canik pistol dovetails and Glock rear sight dovetails are the same. It does not fit optic ready Caniks, such as TP9 Elite Combat, TP9 SFx, TP9 Executive, METE or Rival models. It fits Ade RD3-006A (Huracan), RD3-006B (Python), RD3-009 (Crusader), RD3-012 (Delta), RD3-013 (Bertrillium), RD3-015 (Zantitium), Vortex Venom and Viper, Burris Fastfire, Meopta, Shield, Docter, and Insight red dots. Does Not fit trijicon rmr, holosun, or shield footprint red dots.
Construction
Machined from aircraft-grade aluminum with hard anodizing finish. It comes with screws and hardware for installation. Ade Advanced Optics highly recommend DIY only if user has gunsmith experience, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm or optic and personal injury. This plate does not fit Glock with an aftermarket slide. Attaches firmly to your firearm for sure performance in tactical situations. It replaces the Picatinny mount packaged with the red dot sight.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Ade Advanced Optics D1 Red Dot Mounting Plate in Black is an optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to Glock ‘100’. Does not fit Glock with aftermarket slide with optic cut. This Glock plate fits Taurus TX22 Gen2 (not compatible with old TX22), GX4, G3C, and G3 with factory steel sights (does not fit any other Taurus models such as G2, G2C, and G3 without factory steel sight Tx22 or PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. This Glock plate also fits Canik non-optics ready pistols such as TP9 V2, TP9 SA, TP9 DA, TP9 SA MOD 2, TP9 SF, TP9 SFT, TP9 SFL. The rear sight dovetail dimension between those Canik pistol dovetails and Glock rear sight dovetails are the same. It does not fit optic ready Caniks, such as TP9 Elite Combat, TP9 SFx, TP9 Executive, METE or Rival models. It fits Ade RD3-006A (Huracan), RD3-006B (Python), RD3-009 (Crusader), RD3-012 (Delta), RD3-013 (Bertrillium), RD3-015 (Zantitium), Vortex Venom and Viper, Burris Fastfire, Meopta, Shield, Docter, and Insight red dots. Does Not fit trijicon rmr, holosun, or shield footprint red dots.
Construction
Machined from aircraft-grade aluminum with hard anodizing finish. It comes with screws and hardware for installation. Ade Advanced Optics highly recommend DIY only if user has gunsmith experience, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm or optic and personal injury. This plate does not fit Glock with an aftermarket slide. Attaches firmly to your firearm for sure performance in tactical situations. It replaces the Picatinny mount packaged with the red dot sight.
